Gas Monitoring Power Plant
Specifications of the VA-5000 / VA-5000WM Multi-Component Gas Analyzer
| Measurement principle | NDIR | CLA | Magnetopneumatic | Galvanic cell | Zirconia | Paramagnetic | |||
|---|---|---|---|---|---|---|---|---|---|
| Performance | Linearity | Standard | ±1.0% F.S. | ||||||
| Option | ±2.0% F.S.(range ratio 1:20) | - | - | - | - | - | |||
| Response time | 30 sec or less (T90), 40 sec or less (Td+T90); single component*1 | 45 sec (Td+T90) | |||||||
| Warm-up time | 60 min (90 min for SO2) | 60 min | 60 min | 40 min | 20 min | 120 min | |||
| Flow rate | Standard | 0.5L/min | 0.3L/min | 0.5L/min | 0.5L/min | 0.5L/min | 0.5L/min | ||
| Option | 1.0L/min*2 | - | - | - | - | 1.0L/min*2 | |||
| Communication | Ethernet (ModbusTM/TCP) | ||||||||
| Data storage | Option | USB memory | |||||||
| Input/Output (option) | Analog | Input | Maximum 4ch, 0-16 mA / 4-20 mA / 0-20 mA or 0-1 V isolated | ||||||
| Output | Maximum 8ch, 0-16 mA / 4-20 mA / 0-20 mA or 0-1 V isolated, Current output: load resistance < 750Ω, Voltage output: input impedance > 100k Ω | ||||||||
| Digital | Input | Maximum 16ch isolated, Open voltage: 24 V, Short-circuit current 10mA Maximum load resistance < 50 Ω, Minimum pulse width: 0.5 sec | |||||||
| Output | Maximum 16ch isolated, Maximum voltage DC 30 V, Maximum current 1A Minimum voltage DC 0.1 V, Minimum current 0.1 mA | ||||||||
| Sample condition | Ambient temperature, dust free, H2O less than 5°C saturation, Pressure 0 to 490 Pa Other: Shall contain no corrosive gas, combustible gas, and explosive gas. | ||||||||
| Gas connections | Inlet and outlet - 6 mm/4 mm PTFE: a single gas inlet is provided standard; the gas flows sequentially from one module to the next; as an option separate gas inlets can be provided for each module | ||||||||
| Gas tubing | PTFE; stainless steel optional | ||||||||
| Joint | Sample Inlet: Rc 1/8(φ6/φ4mm PTFE joint), Exhaust: φ6/φ4mm PTFE joint Air Inlet: Rc 1/8(φ6/φ4mm PTFE joint); installed CLA. CLA: Exhaust: φ6/φ4mm PTFE joint; installed CLA, MPA Outlet: φ6/φ4mm PTFE joint; installed MPA, Zero gas Outlet: φ6/φ4mm PTFE joint; installed MPA | ||||||||
| Installation | Temperature 0-45°C, Humidity 90% (No condensation), Altitude Max 3000m (combination with only NDIR), (combination with Zirconia, Galvani, MPA, and CLA: max 2000m), No fluctuation of backpressure | ||||||||
| Protection degree | Equivalent to IP20 | ||||||||
| Power | 100-240 V AC (±10%, maximum voltage 250 VAC), 50/60 Hz (±1.0%), Consumption: 100 to 350 VA | ||||||||
| Display | 5.7-inch touch screen | ||||||||
| Case | VA-5000: 19-inch panel mount / VA-5000WM: Mounted on wall | ||||||||
| Exterior dimensions | VA-5000: 430 (W) × 380 (D) × 132 (H) mm / Approx. 17 (W) × 15 (D) × 5.2 (H) in Deozonator unit for CLA: 111 (W) × 95 (D) × 100 (H) mm / Approx. 4.4 (W) × 3.7 (D) × 3.9 (H) in *protrusions excluded VA-5000WM: 424 (W) × 206 (D) × 484 (H) mm / Approx. 17 (W) x 8 (D) x 19 (H) in *protrusions excluded | ||||||||
| Mass | VA-5000: 7-18kg, Approx. 15-40lb / VA-5000WM: 14-24kg, Approx. 31-53lb | ||||||||
*1 When single component: flow rate is 0.5L/min (CLA: 0.3L/min)
*2 Available when all components are NDIR and PMA
Specifications of the VS-5000 Sampling Unit
| Model | VS-5001 | VS-5002 | VS-5003 | VS-5004 |
|---|---|---|---|---|
| Applicable principles | NDIR, Zirconia, Galvanic cell, PMA | NDIR, Zirconia, Galvanic cell, MPA, PMA | NDIR, Zirconia, Galvanic cell, CLA, PMA | NDIR、Zircoia, Galvanic cell, MPA, CLA, PMA |
| Form | 19 inch panel mount | |||
| Sampling method | 5°C dry sampling | |||
| Materials | SUS, PP, PVC, PVDF, PTFE, FKM, CR, Glass | |||
| Flow rate | 1.5～5.0 L/min | |||
| Sample supply | 0.5 L/min x 2 systems*1 | 0.3L/min x 1system | ||
| Power | 100～240 V AC (±10%, maximum voltage 250V AC), 50/60 Hz (±1%) | |||
| Power consumption | 150 VA | 200 VA | ||
| Joint | Sample inlet: φ8/φ6 mm PTFE joint, Sample outlet: φ6/φ4 mm PTFE joint Air outlet: φ6/φ4 mm PTFE joint, MPA inlet: φ6/φ4 mm PTFE joint Regulator: φ6/φ4 mm PTFE joint, Calibration inlet: RC1/8(φ6/φ4mm PTFE joint) Bypass outlet/Exhaust/Drain outlet: φ8mm hose end | |||
| Sample gas | Ambient temperature, Dust: less than 0.1mg/m3, H2O: less than 60°C saturation with drain pot (Approx. 25% H2O), Pressure: ±980 Pa, SO3: less than 50ppm, NO2: less than 6ppm*2 , (Corrosive gas, flammable gas and explosive gas are not included) | |||
| Dimension | 430 (W) x 550 (D) x 221 (H) mm / Approx. 17 (W) x 22 (D) x 8.7 (H) in (protrusions excluded) | |||
| Mass | 14kg / 31lb | 16kg / 35lb | 19kg / 42lb | 20kg / 44lb |
*1 Environmental temperature needs to be less than 35°C. If it's over 35°C, please consult HORIBA.
*2 When the sample gas includes more than 6ppm NO2, it needs to use optional NOX converter.
